garage door
Garage Doors
Home Improvement
homebuilding
News
Remodeling
Uncategorized

Cleaning and Preventative Maintenance

Make your garage door last longer and operate efficiently

garage doorOn a busy day your garage door may open and close 20 times, so routine maintenance is a must to keep it in good working order. After all, an ounce of prevention is worth a pound of cure. Regular garage door cleaning and maintenance will guarantee a great look and longer life of your door.

Appearance

Clean your garage door regularly with mild soap (like dishwashing detergent) and a soft bristle brush. Avoid using abrasive cleaners and very strong liquid cleaners which could damage the paint or cause delaminating. If you have a steel garage door, you can revive its luster by applying a car wax as it will protect against acid rain and dust. It is best to avoid waxing in direct sunlight to achieve better results. If there’s exposed wood, be sure to paint it.

Exterior Weather-Stripping

Clean the weather stripping around the frame and bottom edge with a good all-purpose cleaner. Lubricate it every 2 or 3 months with a Silicone-based lubricant to keep the stripping pliable. Never use a petroleum-based lubricant on weather-stripping as it will dry up and crack. It is important to let your weather-strip hang 1/2″ below the door base when you readjust your perimeter weather-stripping. If the weather-stripping is too tight, the door will not function properly. So if your weather stripping has lost its flexibility, it is best to replace it.

Maintaining the Hardware

Lubricate the rollers, tracks and hinges and all moving hardware parts with a little motor oil (e.g.: 10W30) every three months. Wipe off excess oil with a cloth. As for the springs, use the same oil applied with a cloth. You are not only prolonging the spring’s life, but also reducing the noise the springs make when the door is operated.

At least once a year, home owners must check the following :

  1. the sturdiness and adjustment of the hinges;
  2. the rollers for worn-out ball bearings, flattened rollers, and crooked rods;
  3. the tracks for premature wear and tear, loose bolts, and loose supports;
  4. the cables for wear and tear; especially near the pulleys and the lower support (corner bracket).

Open Sesame: The Garage Door Opener

Depending on the model you own, consult the manufacturer’s guide. If you want to add some white grease on the operator track, again you must first clean the track. By oiling all the mobile parts you will reduce the noise initiated by the motor. If it is still too noisy for your liking, then nylon rollers would help reduce the noise.

Pull on the trolley release cord and operate the door manually. Is it difficult to open and close? The electric operator only replaces manual operation, therefore it must move freely. If you have trouble operating it, contact your local l qualified and licensed garage door installer. For your safety as well as your child’s, check the automatic safety reverse system of the door opener every month.

Get Your Annual Exam

Consider your garage door as an important part of your home. With appropriate annual maintenance, it will operate beautifully. Ask a qualified and licensed garage door installer to lubricate and adjust your garage door at least yearly. In a 10 step check-up, they will lubricate all the above mentioned parts and perform any required repairs.

Post a Comment

Your email is kept private. Required fields are marked *