U625/725 SERIES: High quality, 25 gauge 2 inch thick insulated steel door. This product sets the standard by which all other doors of this type are measured; it is deniably the best in its class.

Sections: Are 2 inches thick in 21 and 18 inch section heights. Each section is manufactured from 25 gauge hot dipped galvanized steel on the face skin and 26 ga. on the backskin. Both of the steel skins are pre painted white with a ten coat rust protection system and rotary embossed with a woodgrain texture. Traditional definition and Bead Board raised panels are pressed into the steel face skin in .125 increments and obtain a depth of .375" which is exclusive among garage doors. The steel skins are laminated to a CFC free polystyrene core delivering an R value up to 9.0. Tongue and groove meeting rails ensure a weather tight fit at the section joints. Bottom sections are fitted with a full length reinforced aluminum bottom retainer that is mechanically fastened and bonded to the section with structural adhesive for added strength and it supports a replaceable UV protected grooved weather seal for further weather protection.

H 2 Hardware And Track: Hinges are hot dipped galvanized, 14/16 gauge wide body end roller hinges and 16 gauge interior hinges. Rollers are 2 inch black nylon or optional white nylon, galvanized torsion tube; self locking fasteners, pre painted torsion springs, and optional inside lock.

U6251 SP 25 GA door 191/4" x 133/4" Traditional Definition (SP)
U6252 LP 25 gauge door 42" x 133/4" Traditional Definition (LP)
U6250 FL 25 gauge door Flush woodgrain No Definition (FL)
U725 25 gauge door 18" x 133/4" Traditional Carriage Bead Board

Widths & Heights: Widths: 8', 9', 10', 12', 14', 15', 15'8", 16', 18'
  Heights: 6'0" thru 14'0" (3" increments). Additional heights available

Up Grade Options:
Glass Designs: Various Designs See Brochure
Decorative Hardware: Various Designs See Brochure

Insulation: CFC free polystyrene insulation with a 26 gauge steel back cover laminated to the face of the door with an R factor of 9.0.

Color: White / Sandstone / Brown (Upcharge for sandstone or brown) All doors are painted from the factory and require post painting. The examples shown have been painted to show some of the possibilities that further enhance the wood effect.

Hardware: H 3 Optional hardware includes 14 gauge commercial hinges throughout. Commercial top fixtures and heavy duty bottom fixtures, 10 ball white Nylon rollers, double lift handles, inside slide lock, back hang fasteners, pre painted springs, galvanized torsion tube, .051 vertical track, and .060 horizontal track.

Warranty: Limited Lifetime Warranty

Download PDF

All information listed is based upon published information as of 12-1-2014. SCH Door Spec 11/2014
1016 West Geneva Drive. • Tempe, AZ 85282 • Tel 480.705.6575 • Fax 480.705.8497
©2024 First United Door Technologies and DW Green Company. All rights reserved.