U225 SERIES: High quality, 25 gauge 2 inch thick un insulated steel door. This product sets the standard by which all other doors of this type are measured; it is deniably the best in its class.

Sections: Are 2 inches thick in 21 and 18 inch section heights. Each section is manufactured from 25 gauge hot dipped galvanized steel. Sections are pre painted white and rotary embossed with a wood grain texture. Traditional definition raised panels are pressed in 1/8" height increments to a depth of .375". Tongue and groove metering rails are roll formed into the panel incorporating the "RITS" reinforced integral truss system. Vertical stile members are 19 gauge hot dipped galvanized I beams for center and end stiles are formed to encapsulate the pan. Stiles are riveted and bonded to the interior face of the door with epoxy based cement. Bottom sections are reinforced with aluminum "L" angle, and bonded to the bottom of the section for supporting a replaceable UV protected bottom weather seal.

H 2 Hardware And Track: Hinges are hot dipped galvanized, 14/16 gauge wide body end roller hinges and 14/16 gauge interior hinges. Rollers are 2 inch black nylon or optional white nylon; galvanized torsion tube; self locking fasteners, pre painted torsion springs, and an optional inside slide lock.

U225 SP 25 gauge door embossment is Traditional Definition 191/4"x133/4"
U225 LP 25 gauge door embossment is Traditional Definition 42"x133/4"

Widths & Heights: Widths: Widths: 8', 9', 10', 12', 14', 15', 15'8", 16', 18'
  Heights: 6'0" thru 14'0" (3" increments). Additional heights available

Up Grade Options:
Glass Designs: Various Designs See Brochure
Decorative Hardware: Various Designs See Brochure

Insulation: CFC free polystyrene insulation with a rigid high impact vinyl back skin with an R factor of 6.25. CFC free polystyrene insulation.

Color: White / Almond / Sandstone / Brown All doors are painted from the factory and require post painting. The examples shown have been painted to show some of the possibilities that further enhance the wood effect.

Hardware: H 1 Optional hardware includes 16 gauge commercial hinges throughout. JR. Residential A top fixtures and RBB bottom fixtures, 10 ball black Poly rollers, lift handles, Pre painted spring, galvanized torsion tube, .045 vertical track, and .055 horizontal track.

Warranty: Limited Lifetime Warranty

Download PDF

All information listed is based upon published information as of 5-1-2014. SCH Door Spec 7/2014
1016 West Geneva Drive. • Tempe, AZ 85282 • Tel 480.705.6575 • Fax 480.705.8497
©2024 First United Door Technologies and DW Green Company. All rights reserved.