Tag Archives: limit switch
Problem Solved: “The garage door won’t close all the way”
Often times when your Garage Door won’t close all the way, your first instinct is to call somebody to fix it. But there are a few things you can check to save yourself some time and money.
The first thing you will want to inspect is the limit switch. The Limit switch regulates how far open and closed the garage door opener moves the garage door. The limit switch can be adjusted with a screw driver.
Here’s some instructions on adjusting the limit switch and further explanations:
The garage door opener has two mechanisms that control the opening and closing of the garage door. One is the safety reverse mechanism that will stop the door operation in the event something obstructs the door. The opener also uses limit switches to determine how far to open and close the garage door.
When the garage door does not open all the way or does not seal to the floor when closed, you can reset the limit switches. Resetting the limit switches is not difficult and requires only one tool.
1. Place a step ladder under the garage door opener motor. Locate the limit switch screws on your unit. Most switches are on the back of the motor [more]