UNIVERSAL MODEL 224 DOOR SPECIFICATION


U224 SERIES: High quality, 24 gauge 2 inch thick uninsulated steel door. This product sets the standard by which all other doors of this type are measured; it is undeniably the best in its class.

Specifications:
Sections: Are 2 inches thick in 21 and 18 inch section heights. Each section is manufactured from 24 gauge hot dipped galvanized steel. Sections are pre painted white and rotary embossed with a wood grain texture. Traditional definition raised panels are pressed in 1/8" height increments to a depth of .375". Tongue and groove metering rails are roll formed into the panel incorporating the "RITS" reinforced integral truss system. Vertical stile members are 19 gauge hot dipped galvanized I beams for center and end stiles are formed to encapsulate the pan. Stiles are riveted and bonded to the interior face of the door with epoxy based cement. Bottom sections are reinforced with aluminum "L" angle, and bonded to the bottom of the section for supporting a replaceable UV protected bottom weather seal. H 2 Hardware And Track: Hinges are hot dipped galvanized, 14/16 gauge wide body end roller hinges and 14/16 gauge interior hinges. Rollers are 2 inch black nylon or optional white nylon; galvanized torsion tube; self locking fasteners, pre painted torsion springs, and an optional inside slide lock.

Models:
U224 SP 24 gauge door embossment is Traditional Definition 191/4"x133/4"
U224 LP 24 gauge door embossment is Traditional Definition 42"x133/4"
U224 FL gauge door Flush

Widths & Heights: Widths: Widths: 8', 9', 10', 12', 14', 15', 15'8", 16', 18', 20'
  Heights: 6'0" thru 14'0" (3" increments). Additional heights available

Up Grade Options:
Glass Designs: Various Designs See Brochure
Decorative Hardware: Various Designs See Brochure

Insulation: CFC free polystyrene insulation with a rigid high impact vinyl back skin with an R factor of 6.25. CFC free polystyrene insulation.

Color: White / Almond All doors are primed painted white or almond from the factory and require postpainting. The examples shown have been painted to show some of the possibilities that further enhance the wood effect.

Hardware: H 3 Optional hardware includes 14 gauge commercial hinges throughout. Commercial top fixtures and heavy duty bottom fixtures, 10 ball white Nylon rollers, double lift handles, inside slide lock, back hang fasteners, pre painted springs, galvanized torsion tube, .051 vertical track, and .060 horizontal track.

Warranty: Limited Lifetime Warranty

Download PDF

All information listed is based upon published information as of 5-1-2014. SCH Door Spec 7/2014
1016 West Geneva Drive. • Tempe, AZ 85282 • Tel 480.705.6575 • Fax 480.705.8497
©2018 First United Door Technologies and DW Green Company. All rights reserved.